ATA PE-2 Safety Beams

132 Fallon Street, North Albury NSW 2640

Protect your family with PE Safety Beams. As soon as an object or person moves through the invisible safety beam the door or gate will stop or reverse to avert serious damage being done.

A photo electric beam fitted correctly can protect your vehicle, your property and your family. In many countries the PE Beam is a mandatory safety accessory for every automatic door or gate. Our industry strongly recommends the use of Photo Electronic beam sensors for peace of mind and to protect against personal injury or damage to property.

The PE-2 infrared photo electric beam is an outdoor detection device that can be used to open or prevent closure of a door / gate, or just indicate that the beam has broken by using a light or buzzer. The PE-2 is manufactured using modern surface mount technology and sophisticated Electronics resulting in a product that has greater reliability and reduced size. When using with the auto close feature on control boards and operators, the PE-2 will prevent a door / gate from closing when a vehicle is obstructing the door / gate way. This provides your access system with added safety and security.

Installation of the PE-2 is designed to be simple and trouble-free. The side amounts of the PE-2 are removable to allow easy fitting. The input voltage to the PE-2 can be either 12V AC/DC or 24V AC/DC. The transmitter indicates power on using a green LED indicator. A red LED indicator mounted on the receiver shows alignment. The PE-2 is aligned correctly when the red LED light is bright. Two Adjusting screws allows simple horizontal and vertical aligning.

Specifications:
Even in poor optical conditions, the PE-2 can still be used
Dual input voltage
Low power consumption
High rated relay contacts
Removable terminal block for easy wiring
Simple installation,using side off mounts
Easy beam alignment and testing procedures
Weatherproof casing made from high-tech polymer
30m range
Indoor / outdoor use
12V AC/DC
24V AC/DC
Temperatures -15"C to +60"C
Output relay N/O & N/C single pole, dry contacts.
Contacts rated to 24 VDC @ 1A
Dimensions 59 x 87 x 40mm
3 Months Warranty

Date Listed: 04/03/2013

Last Edited : 09/01/2013

This ad concerns following areas:

  • elsema N1142

Other ads that may interest you:

Work Foreshore Music Festival in Canberra
ACT State Operations Manager
Cook/chef
Cleaning Ladies
Locum Radiographers and Sonographers
Beauty Therapist
Car Rental cleaner and runner
Commercial Cleaners
Receptionist
Full Time Vet Nurse - Canberra (JOB NO: 198,702MC)

You want add your ad on Defipedia? Send us information listed in Ad addition section.

Is this ad yours? If you want to remove it check Ad removal section.

You can also check Recent ads added on site or contact Defipedia.org Team.


 July 9, 2014 ·  
 Tags: , , , ,  · Posted in: Australia.Defipedia.org



banner